QPP-100 is a compact and versatile quad unit designed for monitoring and surveillance applications, and it allows up to four cameras to be viewed on one screen, in any combination.
QPP comes preconfigured as QUAD or Picture in Picture, depending on the selected configuration. It can be used with any number of video inputs from one to four cameras.
QPP features an advanced digital video processor with provides full control of each picture’s size and position together with picture cropping and overlay.
This means that unlike other quad units, three cameras can be used to fill one view screen, without leaving parts black and unused! It is also very compact and lightweight.
Each system comes with 16 pre-set display modes as standard. All of these can be changed according to customer wishes and up to 8 display modes can be reconfigured to unique customer demand if needed. QPP provides excellent picture quality with real-time update on each channel. Camera identity and/or date and time can be shown onscreen, if needed. Each unit will be configured accordingly to meet each customer’s demands.
QPP will automatically configuring itself for PAL or NTSC operation.
All modes are selectable with three push buttons (different function depending on configuration).
- Versatile unit with superior quality
- Specifically designed for surveillance monitoring applications
- Allows up to four cameras to be viewed on one screen
- Small compact size
- DC powered with low current consumption
- Up to 16 preset display modes
- Excellent picture quality with real-time update rate per channel
- Onscreen date and time and camera identity
- Automatic configuration for PAL or NTSC video inputs
- Can be customized to meet specific customer needs upon request.
- Split video configuration is standard on both Quad and PiP-units.
|Operation temperature range||-40° to +70°C|
|Mechanical size||Approx. 170x130x35mm|
|Finish||Black anodized aluminum|
|Weight||Approx. 540 grams|
|Operation voltage range||9 to 24VDC|
|Power consumption||< 3 Watts|
|Current consumption at 12VDC||Approx. 240mA|
|Video standards supported||PAL or NTSC (auto)|
|Video input / output levels||1Vpp into 75R|
|Video bandwidth||4MHz @-1dB, 5,35 MHz @-3dB|
|Signal to noise ratio||> 60 dB weighted|
|Insertion loss||< ± 3%|
|Differential gain||< ± 3%|
|Differential phase||< ± 3degrees|
|Luminance linearity||< ± 1.4 %|
|Chrominance linearity||< ± 1.4 %|
|Chrominance/ luminance delay||< 40 ns|
|Tilt||< ± 1%|
|AGC pulling range||> ± 15 %|
|Digital sampling (PAL)||576 Lines by 720 pixels|
|Lock-in time||<1 second|
|Input camera genlock||Not required|
|Number of input channels||2-4 depending on model|
|Pre-set display modes||14-15 depending on modelMax. 16 in total8 custom on request|
|Update rate per image||Real-time|